DESCONECTADOR BATERIA 1000A C/LLAVE EXTRAIBLE

...

Waterproof battery disconnector for two batteries.Watertight battery disconnector for two batteries. Made of anticorrosive plastic material. Capacity: 280 amps. continuous and 345 amp. momentarily. Recessed or surface mounting. Measurements: 102 x 102 x 67 mm....

Remote battery disconnect switch for disconnecting and connecting batteries via a push button, with an emergency manual function. It can be operated remotely or on-site. Made of plastic with brass contacts. Features an output signal for installing a control LED. Voltage: 9.5V-32V. Current: 275A continuous, 455A intermittent. Starting current: 1250A. Power consumption (off): 12mA. Power consumption (on): 15mA. Switch operation: 120mA for 3 seconds at 12V nominal.

...

Two-stage on/off switch. Plastic body and chrome-plated brass lever, stem, and nut. For panels up to 9.5 mm thick. 3/8"

Cable exit possible on 4 sides. Max. capacity at 50V DC - for 30 seconds: 1000 A. Max. capacity at 50V DC - continuous: 300 A. Max. capacity at 50V DC - intermittent: 500 A. Pin diameter: 10 mm.

OUTDOOR PANEL-MOUNTED SWITCHES. BLACK. WITH ADHESIVE LABELS. MOUNTING DIMENSIONS: 37x21 MM. 15 AMP. AT 12 V. 6 TERMINALS.

...

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

Connectors for high amperage. polyamide base reinforced with fiberglass. Stainless steel screws and chrome-plated brass nuts.