LLAVE CORTABATERIAS ROCA

PULL-OUT KEYMAIN CIRCUIT BREAKERMARINE POLYCARBONATE BODY AND NON-CORROSIVE METAL CONTACTS FOR SURFACE INSTALLATIONS....

OUTDOOR PANEL-MOUNTED SWITCHES. BLACK. WITH ADHESIVE LABELS. MOUNTING DIMENSIONS: 37x21 MM. 15 AMP. AT 12 V. 6 TERMINALS.

Remote battery disconnect switch for disconnecting and connecting batteries via a push button, with an emergency manual function. It can be operated remotely or on-site. Made of plastic with brass contacts. Features an output signal for installing a control LED. Voltage: 9.5V-32V. Current: 275A continuous, 455A intermittent. Starting current: 1250A. Power consumption (off): 12mA. Power consumption (on): 15mA. Switch operation: 120mA for 3 seconds at 12V nominal.

Marine Town brand 300A battery disconnector. Battery disconnector for emergency cases, with rotating valve for rapid battery rotation and quick and safe disconnection.

...

M-750 WATERTIGHT BATTERY DISCONNECTOR FOR 2 GROUPS OF BATTERIES. MADE OF ANTI-CORROSIVE PLASTIC MATERIAL. CAPACITY: 310 AMP. IN CONTINUOUS AND 500 AMP. FOR 5 SEC. RECESSED OR SUPERIMPOSED MOUNTING MAXIMUM VOLTAGE: 36 V. Ø 140 MM. HEIGHT: 90 MM....

SURFACE INSTALLATION....

...

Waterproof battery disconnector for batteries. Made of anticorrosive plastic. Can be flush or surface mounted. Complies with the ISO-8846 standard.Continuous capacity: 300 AInstantaneous capacity (5 s): 1000 AMaximum voltage: 48 VDimensions:w/key: 69x69x71.6 mm without the key and 69x69x99 mm with the key.w/button 1 battery: 69x69x75 mmc/button 2 batteries: 69x69x75 mm...

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

Heavy Duty battery disconnect switch, made of plastic material and tinned copper contacts. Surface or recessed fixing. Total measurement: 98x98 mm. Voltage: 32 V. IP67 2 P ON/OFF (501821): 1750 Amp. peak, intermittent 900 Amp. and 600 Amp. continuous. 4 P 1-2-1+2-OFF (501823): with diode bridge protection (LED indicator). 1600 Amp. peak, intermittent 700 Amp. and 500 Amp. continuous.