NAUTICAL SPORTS

Submersible bilge pump with built-in automatic switch. Made of ABS plastic, anti-scaling impeller and stainless steel shaft. Non-return valve at the outlet to prevent the return of water. 1 m connection cable. Complies with ISO 8849. Two-year limited warranty. Model/Voltage (Max. Flow) (Flow at 1 m) (Max. Height) (Max. Consumption) (Fuse) 600 GPH/12 V ( 557 GPH/2108 L/h) (243 GPH/920 L/h) (1.5 m) ...

Submersible bilge pumps with built-in electronic automatic control. It starts every 2.5 mins, for 0.5 s if there is no water level, otherwise it continues until the stop level is reached. The 600/800/1100 GPH models start with a water level of 3.8 cm, stop when reaching 0.75 cm, the 1500/2000 GPH models start with a water level of 4.5 cm, stop at reach between 1-3 cm. Non-return valve at the outlet. AISI 316 stainless steel shaft, conductors and wiring in tinned copper and marine grade silicone. Complies with ISO 8846 and 8849 standards. Maximum flow rate/Voltage (Maximum head) (Flow at 1 m height) (Maximum electrical consumption) 600 GPH/12 V (2.5 m) (500 GPH) (2.5 A) 600 GPH/24 V (2.5 m) (500 GPH) (1.5 A) 800 GPH/12 V (3 m) (600 GPH) (3.5 A) 800 GPH/24 V (3 m) ( 600 GPH) (2 A) 1100 GP...

...

Extremely compact, with built-in electronic level sensor. ABS housing, stainless steel shaft. Low power consumption. Removable from the base with a click. CE certified by RINA, European Directive 2013/53/EU according to ISO 8846.

Bilge pump with removable cartridge...

Automatic bilge pump, compact design Flow (straight): 1100GPH - 75L/min Flow 1m: 1000GPH - 65L/min Hose Ø: 29mm Dimensions: 151 x 78 x 95mm Volts: 12V Flow (straight): 500GPH - 32L /min Flow rate 1 m: 400GPH - 25L/min Fuse: 3A Hose Ø: 19 mm Dimensions: 151 x 78 x 95 mm Flow rate (straight): 750GPH - 50L/min Flow rate 1 m: 660GPH - 42L/min Hose Ø: 19 mm Dimensions: 151 x 78 x 95mm

Non-return valve at the outlet. AISI 316 stainless steel shaft, conductors and wiring in tinned copper and marine grade silicone. Complies with ISO 8846 and 8849 standards. Maximum flow rate/Voltage (Maximum head) (Flow at 1 m height) (Maximum electrical consumption) 600 GPH/12 V (2.5 m) (500 GPH) (2.5 A) 600 GPH/24 V (2.5 m) (500 GPH) (1.5 A) 800 GPH/12 V (3 m) (600 GPH) (3.5 A) 800 GPH/24 V (3 m) ( 600 GPH) (2 A) 1100 GPH/12 V (4 m) (700 GPH) (4 A) 1100 GPH/24 V (4 m) (700 GPH) (2.5 A) 1500 GPH/12 V (5 m) (1300 GPH) (4.5 A) 1500 GPH/24 V (5 m) (1300 GPH) (2.5 A) 2000 GPH/12 V (5.5 m) (1510 GPH) (7.5 A) 2000 GPH/24 V (5.5 m) (1510 GPH) (4 A) Cartridge motor can be obtained as a spare part (check with the store). 24V versions are available by special order.

12/32 V...

High-strength plastic housing, compact and lightweight. Stainless steel shaft. No built-in automatic switch. 500/1890 GH/LH 12V. Current: 4A. Hose: 19mm. 1000/3780 G/LH 12V. Current: 5.5A. Hose: 29mm. 1500/5600 G/LH 12V. Current: 8A. Hose: 29mm. 1500/5670 G/LH 24V. Current: 5A. Hose: 29mm. 2000/7560 G/LH 12V. Current: 11A. Hose: 29mm. 2000/7560 G/LH 24V. Current: 6A. Hose: 29mm.

14 AMP. 12/32 V / 115 x 40 x 50 MM.20 AMP. 12/32 V ...

Submersible pump made of high resistance plastic, compact and light. Stainless steel shaft and bearings.Flow rate/Voltage (Max height) (Consumption) (Fuse) (Dimensions) (Hose diameter)1750 GPH (6624 L/H)/12 V (13.5 ft (4.1 m)) (10A) (15A) (144.3x120.5x164.5mm) (1 1/8" 29mm)1750 GPH (6624 L/H)/24V (13.5ft (4.1m)) ( 5A) (7A) (144.3x120.5x164.5mm) (1 1/8" 29mm)2300 GPH (8706 L/H)/12V (11.8f...

...

High-Flow Bilge Pumps. The 1750 GPH High-Flow Submersible Electronic Bilge Pump is a device used on boats to drain accumulated water. Highlights of the 1750 GPH High-Flow Submersible Electronic Bilge Pump: High Pumping Capacity: This bilge pump has a pumping capacity of up to 1,750 gallons per hour (GPH), allowing for quick and efficient drainage of accumulated water from the boat's hull. Submersible Design: The pump is designed to operate submerged in water, making it easy to install in the boat's hull. This allows the pump to automatically activate when the water level reaches a preset threshold, ensuring continuous and reliable operation. Energy Efficiency: Despite its pumping power, the pump is designed to be energy efficient. This helps minimize the impact on the boat's...

...