NAUTICAL SPORTS

Active filters

Availability: 5 In Stock
Non-return valve at the outlet. AISI 316 stainless steel shaft, conductors and wiring in tinned copper and marine grade silicone. Complies with ISO 8846 and 8849 standards. Maximum flow rate/Voltage (Maximum head) (Flow at 1 m height) (Maximum electrical consumption) 600 GPH/12 V (2.5 m) (500 GPH) (2.5 A) 600 GPH/24 V (2.5 m) (500 GPH) (1.5 A) 800 GPH/12 V (3 m) (600 GPH) (3.5 A) 800 GPH/24 V (3 m) ( 600 GPH) (2 A) 1100 GPH/12 V (4 m) (700 GPH) (4 A) 1100 GPH/24 V (4 m) (700 GPH) (2.5 A) 1500 GPH/12 V (5 m) (1300 GPH) (4.5 A) 1500 GPH/24 V (5 m) (1300 GPH) (2.5 A) 2000 GPH/12 V (5.5 m) (1510 GPH) (7.5 A) 2000 GPH/24 V (5.5 m) (1510 GPH) (4 A) Cartridge motor can be obtained as a spare part (check with the store). 24V versions are available by special order.

Availability: 3 In Stock
Submersible bilge pumps with built-in electronic automatic control. It starts every 2.5 mins, for 0.5 s if there is no water level, otherwise it continues until the stop level is reached. The 600/800/1100 GPH models start with a water level of 3.8 cm, stop when reaching 0.75 cm, the 1500/2000 GPH models start with a water level of 4.5 cm, stop at reach between 1-3 cm. Non-return valve at the outlet. AISI 316 stainless steel shaft, conductors and wiring in tinned copper and marine grade silicone. Complies with ISO 8846 and 8849 standards. Maximum flow rate/Voltage (Maximum head) (Flow at 1 m height) (Maximum electrical consumption) 600 GPH/12 V (2.5 m) (500 GPH) (2.5 A) 600 GPH/24 V (2.5 m) (500 GPH) (1.5 A) 800 GPH/12 V (3 m) (600 GPH) (3.5 A) 800 GPH/24 V (3 m) ( 600 GPH) (2 A) 1100 GP...

Availability: 6 In Stock
Transfer pump for all types of liquids (water, diesel, gasoline, etc.) from one container to another without mess and effort. Insert the pump into the container with the liquid to be transferred, along with the end of the tubing into which the liquid will be transferred. By placing the second container at a slightly lower level than the first, simply agitate the pump in the liquid to raise it to the gooseneck of the tubing. At this point, the transfer will be activated by "falling" into the receiving container. To stop the flow, simply remove the pump from the liquid. Made of copper and complete with 1.7 m of tubing. No electricity required; fast, safe, and clean.

Availability: 1 In Stock
Automatic bilge pump, compact design Flow (straight): 1100GPH - 75L/min Flow 1m: 1000GPH - 65L/min Hose Ø: 29mm Dimensions: 151 x 78 x 95mm Volts: 12V Flow (straight): 500GPH - 32L /min Flow rate 1 m: 400GPH - 25L/min Fuse: 3A Hose Ø: 19 mm Dimensions: 151 x 78 x 95 mm Flow rate (straight): 750GPH - 50L/min Flow rate 1 m: 660GPH - 42L/min Hose Ø: 19 mm Dimensions: 151 x 78 x 95mm

Availability: 3 In Stock
High-strength plastic housing, compact and lightweight. Stainless steel shaft. No built-in automatic switch. 500/1890 GH/LH 12V. Current: 4A. Hose: 19mm. 1000/3780 G/LH 12V. Current: 5.5A. Hose: 29mm. 1500/5600 G/LH 12V. Current: 8A. Hose: 29mm. 1500/5670 G/LH 24V. Current: 5A. Hose: 29mm. 2000/7560 G/LH 12V. Current: 11A. Hose: 29mm. 2000/7560 G/LH 24V. Current: 6A. Hose: 29mm.

Availability: 2 In Stock
High-Flow Bilge Pumps. The 1750 GPH High-Flow Submersible Electronic Bilge Pump is a device used on boats to drain accumulated water. Highlights of the 1750 GPH High-Flow Submersible Electronic Bilge Pump: High Pumping Capacity: This bilge pump has a pumping capacity of up to 1,750 gallons per hour (GPH), allowing for quick and efficient drainage of accumulated water from the boat's hull. Submersible Design: The pump is designed to operate submerged in water, making it easy to install in the boat's hull. This allows the pump to automatically activate when the water level reaches a preset threshold, ensuring continuous and reliable operation. Energy Efficiency: Despite its pumping power, the pump is designed to be energy efficient. This helps minimize the impact on the boat's...

Availability: 2 In Stock
Diaphragm pump with built-in pressure switch for automatic start. Recommended for fresh and salt water. 5 chambers to serve up to 5 water points (shower, sink, etc...). It can work with or without a pressure accumulator. Casing made of plastic and propylene, santoprene membrane and joints and valves in EPDM/vition. Anti-vibration rubber screw anchors. Includes junctions and filter. 3/4" quick...

Availability: 2 In Stock
It can run dry without damage. Vibration-free and very quiet. Internal bypass protects the pump from excessive inlet pressure. Permanent magnet motor with self-lubricating shaft. The 4-valve system prevents the pulsations characteristic of other autoclaves, with a semi-open valve. Reverse polarity protection. Internal stainless steel bearings. Complete with 4 connections (2 x 1/2" threaded + 1 x 14 mm straight hose barb + 1 x 90° 14 mm hose barb) and a suction filter, all with click couplings.



Availability: 2 In Stock
Diaphragm pump with built-in pressure switch for automatic start. Recommended for fresh and salt water. 3 chambers to serve up to 2 water points (shower, sink, etc...).Housing manufactured in plastic and propylene, santoprene membrane and EPDM/vition gaskets and valves. Aclajes for rubber screws. Includes bolts and filter. Meets or exceeds RoHS, SGS, and ISO standards. 2 years limited warranty.Sel...
Product added to compare.