DEFENSE HOLSTER F SIGNATURE SI-F

FLAT SEMI-RIGID FENDERSMADE OF CLOSED CELL POLYETHYLENE FOAM PROTECT THE BOAT'S HULLDO NOT ABSORB WATER OR RETAIN HYDROCARBONS EASY TO STOREEASY TO CLEANCAN BE USED AS CUSHIONS(TO SIT/KNEEL)NO RISK OF FLATTING...

...

PARA PAINT POLYFORM A-4MEDIDAS 550X710 MILIMETERS...

Made of high-strength PVC or dropstich depending on the versions with stainless steel ring. Ultra-small footprint when the product is deflated, marine use: resistance to shocks, UV, salt water, etc. Inflates in 30 seconds thanks to a standard valve.

FOR CASTRO FENDERS NDE-7 MEASUREMENTS 315X1015 MILLIMETERS...

Value for money is very goodWide range of measures for all lengths.National manufacturing....

FOR POLYFORM DEFENSESMade of extensible polyester terryThe socks for fenders avoid the classic stains of the fenders on the helmet, and protect from UVF-1 23X73 CM.F-5 30X76 CM....

Fenders designed to be installed on the finger of the dock without maintenance and manufactured with the highest quality in 316 stainless steel and EVA. This fender combines horizontal rotational movement and a certain vertical elevation. It can be adjusted horizontally and its installation on the dock rail is quick and easy. How they work: The HF200V, in addition to having the ability to rotate horizontally, also has vertical displacement that allows it to more gently absorb contact with the boat. At the moment of contact, the fender rises and rotates. Location The ideal place for installation is the maximum beam of the boat, leaving around 2 meters between them depending on the profile and length of the boat. This space between both fenders would correspond to the maximum beam, this s...

The system converts a simple fender into a bumper fixed to the pontoon. Set of 2 complete IB1 support units for universal fenders, made of AISI 316 L stainless steel, allow the use of a classic fender as a bumper on a pontoon or finger that has a universal rail of 17mm +/-1mm. It can support fenders with a head neck of up to 50 mm wide, and 20/30 mm holes, which means it complies with most of those on the market.

The system converts a simple fender into a bumper fixed to the pontoon. This FF28 model is the heavy version of the V1 model, designed to withstand higher workloads and for fenders that have a 28mm to...