BUOY COVER A-1 MARINE CM

...

covers start at A-3...

F-01S 13 x 37 cm 0,62 kg

F-01M 13 x 46 cm 0,68 kg

F-01L 13 x 56 cm 0,75 kg

F-1 15 x 61 cm 1 kg

F-02 20 x 66 cm 1,65 kg

F-2 22 x 61 cm 1,75 kg

F-3 22 x 74 cm 2,10 kg

F-4 22 x 104 cm 2,90 kg

F-5 29 x 77 cm 3 kg

F-6 29 x 109 cm 4,20 kg

F-7 37 x 102 cm 5,30 kg

F-8 37 x 144 cm 7,60 kg

F-11 59 x 146 cm 10,50 kg

F-13 75 x 188 cm 23 kg

Made of high-strength PVC or dropstich depending on the versions with stainless steel ring. Ultra-small footprint when the product is deflated, marine use: resistance to shocks, UV, salt water, etc. Inflates in 30 seconds thanks to a standard valve.

Fabricadas en PVC rotomoldeado. Asa sólida y pared de de espesor uniforme, con un acabado superficial suave y brillante. Alta resitencia a la abrasión y a la luz solar.Válvula de plastico de calida...

Flexible dock mooring hanger that allows access to mooring lines from the boat without having to go ashore or rely on assistance. Made of highly flexible PVC and nylon, it comes with reflective tape on the top for easy identification at night. Height: 1.30 m. Very easy to install on the dock rail.

Clamp to join the modules together....

The system converts a simple fender into a bumper fixed to the pontoon. Set of 2 complete IB1 support units for universal fenders, made of AISI 316 L stainless steel, allow the use of a classic fender as a bumper on a pontoon or finger that has a universal rail of 17mm +/-1mm. It can support fenders with a head neck of up to 50 mm wide, and 20/30 mm holes, which means it complies with most of those on the market.

Made of white vinyl. Inflation valve that requires no special adapter. Very lightweight. 410x115 mm. G-2 510x140 mm. G-3 560x150 mm. G-4 660x180 mm. G-5