WATERPROOF DRAWER SWITCH

Quick-connect switch, made of polycarbonate

Switch with plastic body and lever, stem and nut in chrome-plated brass. FOR PANELS UP TO 3/8'' = 9.5 MM. BUTTON: MOM ON - OFF - MOM ON

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

Two-stage on/off switch. Plastic body and chrome-plated brass lever, stem, and nut. For panels up to 9.5 mm thick. 3/8"

...

...

...

Push-button circuit breakers with 10 mm threaded front fixing. Without cover. Available in various amperages. Dimensions: Height: 35 mm Width: 14 mm Depth: 43 mm (including terminals)

Remote battery disconnect switch for disconnecting and connecting batteries via a push button, with an emergency manual function. It can be operated remotely or on-site. Made of plastic with brass contacts. Features an output signal for installing a control LED. Voltage: 9.5V-32V. Current: 275A continuous, 455A intermittent. Starting current: 1250A. Power consumption (off): 12mA. Power consumption (on): 15mA. Switch operation: 120mA for 3 seconds at 12V nominal.