MAGNETOTHERMAL FOR BUILT-IN WINDLASS GLOBALNAUTIC

...

PULL-OUT KEYMAIN CIRCUIT BREAKERMARINE POLYCARBONATE BODY AND NON-CORROSIVE METAL CONTACTS FOR SURFACE INSTALLATIONS....

...

Heavy Duty battery disconnect switch, made of plastic material and tinned copper contacts. Surface or recessed fixing. Total measurement: 98x98 mm. Voltage: 32 V. IP67 2 P ON/OFF (501821): 1750 Amp. peak, intermittent 900 Amp. and 600 Amp. continuous. 4 P 1-2-1+2-OFF (501823): with diode bridge protection (LED indicator). 1600 Amp. peak, intermittent 700 Amp. and 500 Amp. continuous.

WATERTIGHT BATTERY DISCONNECTOR M-750 FOR 2 GROUPS OF BATTERIES. WITH KEY MADE OF ANTI-CORROSIVE PLASTIC MATERIAL. CAPACITY: 310 AMP. IN CONTINUOUS AND 500 AMP. FOR 5 SEC. RECESSED OR SUPERIMPOSED MOUNTING MAXIMUM VOLTAGE: 36 V. Ø 140 MM. HEIGHT: 90 MM....

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

68x165mm. Watertight electrical panelsWatertight 12v panels of great reliability. (Lifetime warranty). More compact than their equivalents on the market. Highly functional and backlit for easy identification of the switch or function. 15 Amp fuse. maximum A red LED indicates any fuse malfunction, this can be easily changed by removing the front part of the panel. Sealing ensured from behind by mea...

Cable exit possible on 4 sides. Max. capacity at 50V DC - for 30 seconds: 1000 A. Max. capacity at 50V DC - continuous: 300 A. Max. capacity at 50V DC - intermittent: 500 A. Pin diameter: 10 mm.