INTERRUPTOR ON-OFF GOMA

SURFACE INSTALLATION....

M-750 WATERTIGHT BATTERY DISCONNECTOR FOR 2 GROUPS OF BATTERIES. MADE OF ANTI-CORROSIVE PLASTIC MATERIAL. CAPACITY: 310 AMP. IN CONTINUOUS AND 500 AMP. FOR 5 SEC. RECESSED OR SUPERIMPOSED MOUNTING MAXIMUM VOLTAGE: 36 V. Ø 140 MM. HEIGHT: 90 MM....

...

...

Remote battery disconnect switch for disconnecting and connecting batteries via a push button, with an emergency manual function. It can be operated remotely or on-site. Made of plastic with brass contacts. Features an output signal for installing a control LED. Voltage: 9.5V-32V. Current: 275A continuous, 455A intermittent. Starting current: 1250A. Power consumption (off): 12mA. Power consumption (on): 15mA. Switch operation: 120mA for 3 seconds at 12V nominal.

OUTDOOR PANEL-MOUNTED SWITCHES. BLACK. WITH ADHESIVE LABELS. MOUNTING DIMENSIONS: 37x21 MM. 15 AMP. AT 12 V. 6 TERMINALS.

Made of black anodized aluminum. 3 15 A 12/24 V lever switches with rubber protector (1xOn-Off-On, 1xOn-Off, 1xMom On – Off). Includes magneto-thermal circuit breakers (2x10 A and 1x15 A). IP65 front protection against dust and splashes. Includes labels and screws....

4 position battery disconnector. Max. 0.25 sx 10: 1500 A Reference BS9002E Circuits 1 (ON/OFF) AFD Continuous 350 A Electricity 36V DC Intermittent 525 A Brand Blue Sea Measurement 98 x 98 mm

...

Specifically designed for marine use. The switch trips instantly in the event of a severe overload (e.g., short circuit), while for overloads up to 50% it remains connected for a few seconds to allow time for the current to return to normal if related to an occasional event. In the event of a short circuit, the switch cannot be reset unless the problem is resolved. - Protruding lever switch - Rocker lever actuator, IAG series universal 12/220 V, front panel mounting, Ø 16 mm. - Flush lever switch with horizontal or vertical mounting - Flat flush rocker actuator with colored optical indicator in the "OFF" position. IEGB series universal 12/220 V, front panel mounting 32x19 mm.

...

Circuit breaker recommended for protecting windlasses and other high-power loads. Flush-mounted. Protects the windlass from overload and short circuits. Maximum voltage: 42 VDC. Cut-out dimensions: 48 x 39 mm. Distance between bolts: 60 mm.